GYROSCOPIC MIXERS

M200 - MANUAL | M250 - SEMI-AUTOMATIC

M200 – MANUAL

M250 – SEMI-AUTOMATIC

TECHNICAL FEATURES

Gyroscopic mixers are available with single or three-phase inverter-actuated motors.
Strong and versatile, they allow an easy management of mixing time and a selection of three different mixing speeds.
Three different models offer a range of solution, from a manual to a fully automatic version.

PLUS
• mixing duration may be set
• mid-cycle revolution inversion
• three speeds available
• can repositioning at the end of the each cycle
• pull-out table

Download data sheet

TECHNICAL FEATURES

Maximum bucket dimensions	Ø 380 mm × H 430 mm
Minimum can height	70 mm
Multiple cans adapter	Upon request
Maximum loading capacity	35 kg
Bucket clamping	Manual
Handle	Single overturnable handling or double rotating handling
Machine closing	Rolling gate with interlock
Mixing motor	Single-phase motor, power up to 1,1 kW (M200) Three-phase motor driven by inverter, power up to 1,1 kW (M250)
Sense of rotation	Single direction of rotation (M200) Clockwise and counterclockwise with reversal of rotation at half time of mixing cylce (M250)
Can repositioning	Manual (M200), Automatic (M250)
Gyroscopic ratio	1 ÷ 2
Mixing speed	Constant speed (120 rpm) (M200) 3 speeds to be selected on the display (100-140-180 rpm) (M250)
Timer for mixing cycle	Included
Protection level	IP 32
Emergency stop	Included
Weight	182 kg
Overall dimensions	W 783 × D 806 × H 1.058 mm
Noise level	< 80 db(A), measured according to DIN 45.635 regulation (no load)
Electrical requirement	230/115 V AC-50/60 Hz